OmniRemote

OmniRemote Iris guides

Everything about setting up and living with your Iris hub. Your licenses, orders, hubs and the image download live on your account page.

Quick answers

  • Setup WiFi: OmniRemote-Iris-Setup, password omniremote, page at http://setup.omniremote.us or http://192.168.4.1. Turn mobile data off first.
  • Hub address on your network: http://omniremote-iris-XXXX.local:8765 or the IP from your router with :8765. XXXX is the last 8 characters of the hub's WiFi MAC.
  • All is well: the ring shows the logo, purple center and one cyan blade at lower right, breathing slowly.
  • Reset WiFi only: hold the HAT button 5 seconds until one long beep, then let go. Devices, users and license are kept; it reboots into setup mode.
  • Factory reset: keep holding to 10 seconds (three beeps). Everything is erased, like a fresh flash. Also on the hub page under Settings → Danger Zone, after a backup download.
  • The manual: the Help tab on the hub page itself, always matching the software version you run, and a copy here.
  • Needs internet: outbound only, for updates and a periodic license check. Works on an IoT VLAN if it can get out.

Getting help

Questions, issues or feature requests: write to us through the contact page. We read every one. Include what the ring is doing and what you heard.