OmniRemote
Your Iris hub
This is your hub's permanent link. Keep it: it always finds your hub on your home network.
Your hub is online
Its address on your home network is
Open my hub
Nothing loads when you tap it? Your phone or computer must be on the same WiFi as the hub — this address doesn't work over cellular or from elsewhere. Join your home WiFi and tap again. If the hub just powered on, give it a minute: the OmniRemote logo on the ring (purple center, cyan blade) means it's ready.
Backup address on the same WiFi: . Or use the OmniRemote app, which finds the hub by itself.
Waiting for your hub to come online
Your hub hasn't reported in yet. If you just finished setup, this takes 1–2 minutes: the center light beats purple while it starts; the OmniRemote logo with a sweeping cyan blade means it's ready. This page checks again every few seconds — just leave it open.
Still waiting after 5 minutes? The hub couldn't join your WiFi (usually a mistyped password) or has no internet access. Hold the button on the HAT for 5 seconds until you hear one long beep to restart setup, then see
troubleshooting.
This link is incomplete
A hub link looks like omniremote.us/hub/#… followed by a code. The code is shown at the end of hub setup and in the "your hub is online" email. If you lost it, the OmniRemote app finds your hub without it, or see troubleshooting for other ways to reach it.
Can't check right now
We couldn't reach the lookup service. Check that you're online and try again. Your hub itself is unaffected — the OmniRemote app still finds it on your home WiFi.
omniremote.us · Patent Pending · OmniRemote™ is a trademark of One Eye Enterprises LLC